1. Shurflo

2. Flojet N5000

3. Flojet G55

Shurflo:

Step 1

Locate the plastic yellow fitting on the bottom of the pump.

Step 2

Slide the retaining clip to the unlock position.

Step 3

Pull down on the yellow fitting to remove it.

NOTE: If the removed fitting is leaking CO2, turn the CO2 off.

2 Types of Flojet N5000 CO2 Fitting Disconnects:

1. Stainless steel retaining clip

2. Plastic retaining clip

Stainless steel retaining clip:

Step 1

Use a screwdriver to loosen the retaining screw.

Step 2

Swing the retaining clip to the unlock position.

Step 3

Pull down on the brass fitting to remove it.

NOTE: If the removed fitting is leaking CO2, turn the CO2 off.

Plastic retaining clip:

Step 1

Slide the retaining clip to the unlock position.

Step 2

Pull down on the brass fitting to remove it.

NOTE: If the removed fitting is leaking CO2, turn the CO2 off.

Flojet G55:

Step 1

Locate the brass fitting.

Step 2

Slide the retaining clip to the unlock position.

Step 3

Pull down on the yellow fitting to remove it.

NOTE: If the removed fitting is leaking CO2, turn the CO2 off.