Starting the Carbonator Pump:

Step 1

Turn on the water halfway.

Step 2

Relieve a small amount of pressure to fill it with water.

Step 3

Leave the valve until water starts to come out.

Step 4

Close the relief valve once filled with water.

Step 5

Turn on the CO2.

• Make sure the pressure is strong enough.
• Adjust if necessary, then tighten to lock.

Step 6

Connect the power to the carbonator pump.

Step 7

Run water through the dispenser. (This may take a while.)

Step 8

Wait until the pump kicks in.

Step 9

Drain all the valves of remaining water.